How To Do A Good Job Of Maintenance Of Woodworking Engraving Machine?

1. Do not place the machine in a humid place, choose a well-ventilated place, and do not expose it to the sun.
2. Regular maintenance, clean the lead screw, and often drip lubricating oil on the rotating parts and tracks to ensure that the machine can efficiently complete the rotation and movement tasks and reduce wear.
3. Do not use one side of the engraving machine for work because of habit, which will cause the lead screw and guide rail to not be in contact with the beam for a long time and cannot be lubricated properly.
4. Before work every day, check whether the control chassis and machine circuits are loose and whether there are mixed lines. Whether the long-term use causes the wire skin to wear and cause leakage.
5. Because the engraving machine is a machine with relatively large dust when working, clean the gaps and dead corners of the machine at least once a week.
6. Do not place debris, corrosive or magnetic materials that may interfere with the operation of the machine on the table of the machine.
7. The power consumption of the engraving machine is generally large, so a voltage stabilizer should be configured to ensure that the ground wire is grounded.
8. The computer connected to the machine should be used separately from the computer used for network work, and CD software should be regular software as much as possible to avoid viruses attacking the computer and machine and affecting work.