How to choose a CNC stone engraving machine that suits you?

The selection of CNC stone engraving machines is particularly important in the stone machinery industry. How to choose a CNC stone engraving machine that suits you is as follows:
1. Pay attention to the function of the engraving machine. The engraving motor of the engraving machine is divided into high power and low power. Some engraving machines have low power and are only suitable for processing materials such as two-color plates, architectural models, small signs, and three-dimensional crafts. This process has been popular for some time, but its application range has been greatly affected by the small engraving power. The other is an engraving machine with a high-power engraving head. This type of engraving machine is divided into two categories. One is a large-format cutting machine: the format is generally more than one meter, but the accuracy of this engraving machine is generally poor; the other is a medium-format engraving machine: this engraving machine is generally used for fine processing and organic sign production.
2. To understand the performance and function of the engraving motor, the engraving head motor of the engraving machine is also very critical, because the head motor works continuously for a long time, so if the engraving head motor is not good, it will also affect the use of the engraving machine.
3. The speed adjustable range of the engraving head motor is generally from several thousand to thirty thousand revolutions per minute. If the speed is not adjustable or the speed adjustable range is small, then it means that the application range of the engraving machine is greatly limited, because different materials must be engraved with different engraving head speeds.
4. The manufacturing process of the engraving machine body: The high-power engraving machine requires the body to be precise and stable when working, so long-term high-power engraving should use a cast body to ensure its processing accuracy and stability.
5. The controller is generally divided into two categories: one type of controller is only used for driving, and all its calculations are completed by the computer. When the engraving machine is working, the computer is in a waiting state and cannot perform typesetting work. The other type of controller is controlled by a single-board computer or a single-chip microcomputer. This controller is actually a computer, so as long as the engraving machine starts working, the computer can immediately perform other typesetting work, especially when engraving for a long time, this advantage is particularly obvious.
6. Screws and guide rails are also important components of the engraving machine. Good screws and guide rails are the guarantee of the accuracy and performance of the engraving machine when it is used for a long time.
In addition, sample engraving before purchasing the machine is very important. When choosing a stone engraving machine, you should first pay attention to the source of information. First of all, if you find it on the Internet, carefully read the online content, website design and professionalism, and then call to confirm the strength. Without strength, there is no way to guarantee quality and service; after the first step, you can go to the company for an on-site inspection to see if it can actually process products for you and whether the budgeted cost can make money for you. This is the most important thing.