Hey there, fellow woodworkers! As a supplier of woodworking planers, I often get asked about the differences between a benchtop thickness planer and a jointer planer. These two machines are essential in any woodworking shop, but they serve different purposes. In this blog post, I'll break down the key differences between them to help you make an informed decision when it comes to choosing the right tool for your projects.
What's a Benchtop Thickness Planer?
A benchtop thickness planer is a compact and versatile machine that's designed to make your wood pieces of a consistent thickness. You place your rough lumber on the infeed table, and as it moves through the planer, the blades shave off the top layer of wood, resulting in a smooth and evenly thick board.
One of the main advantages of a benchtop thickness planer is its portability. Since it's designed to sit on a workbench, it doesn't take up too much space in your workshop. This makes it a great option for hobbyists or those with limited space. You can easily move it around and set it up wherever you need it.


Another benefit is its precision. These planers can typically handle boards up to a certain width, usually around 13 inches, and they can make very fine adjustments to the thickness. This means you can get the exact thickness you want for your project, whether you're making cabinets, shelves, or small wooden crafts.
What's a Jointer Planer?
On the other hand, a jointer planer, often just called a jointer, is used to create a flat and straight edge on a board. When you're working with rough lumber, the edges are usually uneven and not perfectly straight. A jointer comes in handy here. It has a long bed with a cutterhead in the middle. You run the board along the bed, and the cutterhead trims the edge, making it straight and flat.
The jointer is crucial for preparing boards for joining together. For example, if you're making a tabletop and you want to join several boards side by side, you need to make sure the edges are perfectly straight. A jointer helps you achieve this, ensuring a tight and seamless joint.
One of the key features of a jointer is its long infeed and outfeed tables. These tables are set at a specific height relative to the cutterhead, and they help support the board as it passes through the machine. This allows for more accurate and stable cutting, especially when working with longer boards.
Key Differences
Function
The most obvious difference between a benchtop thickness planer and a jointer planer is their function. A thickness planer is all about making the board a consistent thickness, while a jointer is focused on creating a flat and straight edge.
Let's say you have a rough board that's 1.5 inches thick in some places and 1.25 inches thick in others. You'd use a thickness planer to make the entire board, say, 1 inch thick. But if the edges of that board are crooked, you'd use a jointer to straighten them out.
Cutting Action
The cutting action of these two machines is also different. In a benchtop thickness planer, the board is fed through the machine horizontally, and the blades cut across the top surface of the board. This results in a smooth, flat surface on the top of the board.
In a jointer, the board is fed vertically against the cutterhead, and the blades cut along the edge of the board. This creates a straight and flat edge that can be used for joining other boards.
Size and Portability
As mentioned earlier, benchtop thickness planers are generally more portable. They're smaller and lighter, making them easy to move around and set up on a workbench. Jointer planers, on the other hand, are usually larger and heavier. They require a dedicated space in your workshop and are not as easy to move.
However, there are also smaller, benchtop versions of jointers available. These are more compact and can be a good option for those with limited space, but they may not have the same capacity or performance as larger, floor-standing jointers.
Capacity
The capacity of these two machines also varies. Benchtop thickness planers typically have a limited width capacity, usually around 13 inches. This means they can only handle boards up to that width. Jointer planers, on the other hand, come in different sizes, and some larger models can handle wider boards.
In terms of length, both machines can handle a variety of board lengths, but longer boards may require more support and careful handling, especially on a jointer.
When to Use Each Machine
Using a Benchtop Thickness Planer
You'd use a benchtop thickness planer when you need to make your boards a consistent thickness. This is especially important when you're working on projects where the thickness of the wood matters, such as making drawers, boxes, or panels.
For example, if you're making a set of bookshelves, you'll want all the shelves to be the same thickness. Using a thickness planer ensures that each shelf is uniform, which makes the assembly process much easier and the final product look more professional.
Using a Jointer Planer
A jointer planer is essential when you're preparing boards for joining. If you're building a large tabletop or a cabinet door, you'll need to join several boards together. Before you do that, you need to make sure the edges of the boards are straight and flat. A jointer helps you achieve this, ensuring a strong and seamless joint.
It's also useful for squaring up the ends of boards. If you have a board that's cut at an angle, you can use a jointer to make the end square, which is important for accurate measuring and fitting.
Our Woodworking Planer Offerings
As a woodworking planer supplier, we offer a wide range of both benchtop thickness planers and jointer planers. Our machines are made with high-quality materials and are designed to provide reliable performance.
We also have other woodworking machinery available, such as SCM Woodworking Machinery, Wooden Door Carving Machine, and Wooden Door Drilling Machine. These machines can help you take your woodworking projects to the next level.
Conclusion
In conclusion, a benchtop thickness planer and a jointer planer are both important tools in a woodworking shop, but they serve different purposes. A thickness planer is great for making boards a consistent thickness, while a jointer is essential for creating straight and flat edges.
If you're a hobbyist or have limited space, a benchtop thickness planer might be a good place to start. But if you're working on larger projects that require joining boards together, a jointer is a must-have.
If you're interested in purchasing any of our woodworking planers or other machinery, don't hesitate to reach out to us. We're here to help you find the right tools for your needs and answer any questions you may have. Let's take your woodworking to new heights!
References
- Woodworking Magazine
- Popular Woodworking




