How Much Do You Know About The Safe Use Of CNC Engraving Machines?

1. Machine operators must undergo strict training, pay attention to personal safety and machine safety during operation, and operate the engraving machine in accordance with the national machine tool operating procedures.
2. Be sure to turn off the machine when adjusting and repairing the engraving machine.
3. Workers should not wear gloves when operating woodworking engraving machines, because the spindle speed of the woodworking engraving machine is generally very fast during operation. If you accidentally touch the spindle tool, it is easy to bring the gloves and hands in and hurt your hands.
4. Workers must pay attention to the contact between their hands and the blade when feeding materials. Although the woodworking engraving machine is a fully automated equipment, it is still a manual operation in loading and unloading materials, so you must pay attention.
5. When operating the engraving machine, the staff must perform processing operations in accordance with the safety operating procedures, especially some customers who are not familiar with the engraving machine.
6. Because there is high voltage in the engraving machine, do not repair the electrical appliances in the control cabinet by yourself. If you need to find an electrician or manufacturer. To avoid unnecessary accidents.
7. The power supply voltage requires 220V (or 380V), 50Hz. If the power supply voltage is unstable or there are high-power electrical equipment around, please be sure to configure the corresponding stable power supply.
8. The frequency converter for the engraving machine must have a good grounding wire. After replacing the spindle, pay attention to the rotation direction of the spindle.
9. When replacing the engraving machine knife, do not use too much force. Tighten the chuck slightly.
10. When replacing the engraving machine knife, the conversion set must be assembled correctly. Different types of knives must use the corresponding type of conversion sets. When installing the knife, no debris is allowed in the conversion set.
11. Clean and clean regularly to keep the equipment lead screw and guide rails free of debris. Clean the lead screw and guide rails after work every day, and add 20# engine oil. If there is an automatic oiling machine, press it twice after starting the machine every day.
12. When moving the machine, especially when moving over long distances, it must be carried out with professional personnel on site or under the guidance of professional personnel.
13. To install the engraving tool, first insert the chuck into the nut, then insert the engraving tool into the chuck, and finally tighten the nut. Otherwise, there will be noise and the tool will break easily.
14. To fix the workpiece, due to the variety of products, you can use the universal clamp provided by our company to clamp it, or you can find a way to fix it according to your needs.
15. Be sure to start the cooling water pump when starting the machine, and check the spindle regularly during processing to see if it is overheated.
16. After reinstalling Weihong, set the parameters correctly. Note that the spindle speed is adjusted to the corresponding speed, generally 24000r/m.