Home > Blog > Content

What is the operating procedure of the laser cutting machine?

Oct 15, 2024

1. Preparation: Make sure that the power supply and cooling system of the laser cutting machine are working properly, check whether the cutting head and optical fiber of the cutting machine are clean, and prepare the materials to be cut.
2. Set parameters: Set appropriate cutting parameters according to the type and thickness of the material to be cut. These parameters include laser power, cutting speed, gas flow, etc.
3. Position the material: Place the material to be cut on the cutting table and fix it with a clamp or magnetic suction to ensure the accurate position of the material.
4. Debug the focal length: Adjust the focal length of the cutting head so that the laser beam can be accurately focused on the surface of the material. This can usually be achieved by moving the cutting head or adjusting the lens.
5. Start cutting: Press the start button and the laser cutting machine starts working. The laser beam is emitted from the cutting head, focused by the lens, and irradiated on the surface of the material for cutting.
6. Monitor the cutting process: During the cutting process, the cutting process can be monitored by observing the positional relationship between the cutting head and the material, as well as the quality of the cutting line. If necessary, the cutting parameters or focal length can be adjusted to optimize the cutting effect.
7. Finish cutting: When the cutting is completed, stop the laser cutting machine. Pay attention to safety and wait for the cutting head to cool down before proceeding to the next step.
8. Cleaning work: Clean the waste and debris generated by cutting, clean the cutting head and optical fiber, and ensure the normal use and maintenance of the equipment.
It should be noted that when operating the laser cutting machine, it is necessary to strictly abide by the relevant safety operating procedures, wear personal protective equipment, and avoid direct exposure of the laser beam to the eyes or skin to avoid injury.

Send Inquiry